Description
Mounting strip for 12 mm pixels, white, hole pitch 7.62 cm (3″)
The HDPE plastic strip holds 12 mm pixels at an even spacing: the pixels are pushed into the holes, which sit at a pitch of 7.62 cm (3″). The strip is flexible and is supplied rolled. One strip is 242.57 cm long and has 32 pixel positions.
Is it right for my project?
What this strip is made for
- Mounting 12 mm pixels at an even spacing — e.g. for mega trees, arches, outlines and matrices
- Straight and curved runs, the strip is flexible
- Longer runs: join several strips with cable ties via the end holes
Not suitable for
- Pixels of a different size — the holes are made for 12 mm pixels
- Load-bearing mounting without a support structure — the strip holds pixels, not loads
7.62 cmhole pitch
HDPEmaterial
0.97 mmmaterial thickness
Mounting
How to mount the pixels
-
Cut to length. Bring the strip or roll to the required length.
-
Push in the pixels. Push the 12 mm pixels into the holes from the front. The cable between two pixels must reach the chosen hole — so the pixel pitch of the string limits the hole spacing.
-
Join and fix. Join several strips via the end holes with cable ties; secure the ends with the reinforcement clips 10171.
Tip: Fix the pixel cables with cable ties at the small holes so that no pulling force acts on the pixels.
Scope of delivery
- 1 mounting strip, 242.57 cm (without pixels)
Frequently asked questions
Which pixel pitch is possible?
Any multiple of the 7.62 cm (3″) hole pitch.
How do I extend the strip?
Overlap two strips at the ends and join them via the end holes with cable ties; the clips 10171 make the ends more stable.
Technical data
Product safety information
Manufacturer information:
Boscoyo Studio LLC
22571 Greenwell Springs Rd
Louisiana
LA 70739 Greenwell Springs
Vereinigte Staaten
sales@boscoyostudio.com
Responsible person:
PIXLtec GmbH
Maybachstraße 8
Baden-Württemberg
Karlsruhe, Deutschland, 76227
info@pixltec.de
