MADRIX LUNA 4

SKU 10274 GTIN 4260263421141 HAN 70064844

  • 4 DMX outputs + 1 DMX input, 5-pin XLR (NEUTRIK)
  • Art-Net, sACN and USB, also usable with third-party consoles
  • 19 inch × 1U, fanless, 100–240 V via IEC power cord
849,90 €
incl. 19% VAT, plus shipping costs

Business customer? Net prices & quotes in your B2B account →

  • This article is located in the inlet
Ships from Germany
Delivery time: 2 - 7 days Delivery to: Germany Other delivery countries
or pay directly
  • This article is located in the inlet
Ships from Germany
Delivery time: 2 - 7 days Delivery to: Germany Other delivery countries

Description

4 DMX universes from Art-Net or sACN, in a 19-inch rack housing

The MADRIX® LUNA 4 converts Art-Net, sACN or USB directly into DMX512 and outputs 4 universes via NEUTRIK XLR sockets, plus one DMX input. The metal housing takes up one rack unit in a 19-inch rack and works without a fan.

Is this right for my project?

What the LUNA is made for

  • Connecting DMX fixtures, dimmers or pixel controllers with DMX input to an Art-Net or sACN network from the rack, 4 universes per device
  • Stage, events and permanent installations: 5-pin XLR sockets, etherCON and mains connection via IEC power cord
  • Operation with MADRIX 5, synchronised across all ports and several devices in sync mode
  • According to the manufacturer also usable as a regular node with other consoles, controllers and software
  • Silent continuous operation: fanless metal housing, power consumption below 5 W

Not suitable for

  • More than 4 universes on one device: then the LUNA 8
  • Setting up and monitoring fixtures via RDM: that is what the STELLA and the STELLA 8 with RDM are for
  • Pixel LEDs directly without a DMX controller: the LUNA outputs DMX, not SPI pixel data; that is what the NEBULA is for
  • DIN rail or outdoor mounting: 19-inch housing rated IP20
Good to know: the LUNA is powered directly with 100–240 V via the IEC inlet, the power cord is included. For operation with MADRIX 5 you need a licence on a MADRIX KEY.
4DMX outputs, 5-pin XLR
2,048DMX channels (4 universes)
1DMX input, 5-pin XLR
1U19-inch rack, fanless
MADRIX LUNA 4 at an angle from the front with the status LEDs.

Art-Net, sACN or USB in, DMX out

  • Art-Net (I, II, 3, 4, including ArtSync) and sACN (E1.31) directly into DMX512
  • 4 DMX outputs (5-pin XLR, female, NEUTRIK) and one DMX input (5-pin XLR, male)
  • USB 2.0 (type B) for direct connection to MADRIX 5
MADRIX LUNA 4 from the rear with XLR sockets, etherCON, USB and IEC inlet.

Rack housing for continuous operation

  • Metal housing 19 inch × 1U, rack ears already mounted
  • Fanless and silent, power consumption below 5 W
  • Network via NEUTRIK etherCON, automatic HTP merging of two Ethernet sources

Further key data

  • Power: 100–240 V AC, 50–60 Hz, max. 0.4 A, IEC inlet (C14); power consumption below 5 W
  • Network: 1 × RJ45 (NEUTRIK etherCON), Auto MDI-X, 10/100 Mbit/s, compatible with 1 Gbit/s networks; USB 2.0 type B
  • Housing: 76 × 482.6 × 44 mm (19 inch × 1U), 1.3 kg, IP20, operation −10 °C to 60 °C
  • Configuration via the built-in web configuration page; 6 status LEDs

Manufacturer data MADRIX.

Connection

Up and running in three steps

  1. Install and power. Screw the LUNA into the 19-inch rack and connect it to the mains with the IEC power cord.
  2. Connect DMX. The DMX cables of your fixtures to the 5-pin XLR outputs, the network to the etherCON socket.
  3. Set up. On the web configuration page assign a universe to each port, then send Art-Net or sACN or connect MADRIX 5 via USB.

The LUNA outputs DMX, not SPI pixel data. Pixel LEDs need a DMX-capable pixel controller behind it.

Scope of delivery

  • MADRIX LUNA 4
  • Power cord (IEC C13)
  • USB 2.0 cable
  • 2 rack ears (already mounted)
  • Technical manual / quick start guide

Frequently asked questions

Does the LUNA also work without MADRIX?
Yes. According to the manufacturer it complies with the official protocol specifications and can be used as a regular node with other consoles, controllers and software.
Do I need a power supply?
No. The LUNA is powered directly with 100–240 V AC via the IEC inlet, the power cord is included.
How do LUNA 4, 8 and 16 differ?
In the number of DMX outputs: 4, 8 or 16. The LUNA 16 takes up two rack units instead of one. DMX input, network, USB and functions are the same on all of them.
Which connectors does the LUNA have?
5-pin NEUTRIK XLR for DMX, a NEUTRIK etherCON socket for the network, USB 2.0 type B and an IEC inlet for power.

Not sure how many universes your setup needs? Tell us about your project and we will tell you what works best.

Discuss your project

Technical data

Item information Value
Control protocol: ArtNetE1.31
Ambient operating temperature: −10 °C to 60 °C
Input voltage: 100–240 V AC, 50–60 Hz
Ethernet ports: 1 × RJ45 (etherCON), 10/100 Mbit/s
Mounting: 19-inch rack, 1U
Dimensions: 76 × 482.6 × 44 mm
Power consumption: below 5 W
Weight: 1.3 kg
Scope of delivery: Power cord (IEC C13), USB 2.0 cable, 2 rack ears (already mounted), Technical manual / quick start guide
Protection rating: IP20
DMX universes: 4
DMX channels: 2,048
DMX ports: 4 outputs, 1 input
Shipping weight: 2,00 kg
Product safety information
Manufacturer information:
inoage GmbH
Wiener Straße 56
Sachsen
01219 Dresden
Deutschland
info@inoage.com
https://www.inoage.de

Matching accessories