Question about item
Description
Waterproof 2-pin xConnect® connector pair (IP65) with cable ends
The connector pair consists of a plug and a socket, each with a cable and stripped wires. It carries power only (red = +, black = −). A PVC coupling nut and a silicone seal protect the mated connection to IP65.
Is it right for my project?
What this connector is made for
- Detachable power lines, e.g. from the power supply to the injection point
- Outdoor connections that should be separable later
- Currents up to 10 A per contact with 0.75 mm² wires
Not suitable for
- Mains voltage — for extra-low voltage only (5–24 V DC)
- Open, unmated connectors outdoors — IP65 applies only when mated and screwed
2-pin
max. 10 Arated current
0.75 mm²wire cross-section
IP65mated and screwed
Connection
How to connect
- Connect the wires. Solder or join the stripped wires — red to +, black to −.
- Insulate. Insulate each solder joint individually, e.g. with heat-shrink tubing.
- Mate. Align plug and socket, push them together and tighten the coupling nut by hand.
Caution: Connect, mate or disconnect only with the power switched off. Protect open connectors from moisture.
Scope of delivery
- 1 pair: plug and socket, each with cable
Frequently asked questions
Is the connection watertight when unmated?
No. Protection to IP65 applies only to the mated connection with the coupling nut tightened.
Does the plug fit other xConnect® parts?
Yes, the 2-pin xConnect® connections, e.g. on the injection branch of the T-connector 10209.
How do I extend the connection?
With the xConnect® extension cable 2-pin (10228) in 2, 5, 10 or 15 m.
Technical data
| Item information | Value |
|---|---|
| Ambient operating temperature: | -40 to +120 °C |
| Wire cross-section: | 0.75 mm² |
| Material: | PVC (housing), copper alloy (contacts), silicone (seal) |
| Number of poles: | 2 |
| Rated current: | max. 10 A per contact |
| Operating Voltage: | 5 Volt DC12 Volt DC9 Volt24 Volt |
| Color: | black |
| WEEE-Reg.-Nr.: | DE 32487762 |
| Connector System: | xConnect® |
| Protection class: | IP65 |
| Shipping weight: | 0,08 kg |
| Content: | 17,00 cm |
Product safety information
Manufacturer information:
PIXLtec GmbH
Maybachstraße 8
Baden-Württemberg
76227 Karlsruhe
Deutschland
info@pixltec.de
Maybachstraße 8
Baden-Württemberg
76227 Karlsruhe
Deutschland
info@pixltec.de