You can connect your LED pixels directly to the PixLite 4 MkII Controller. The SPI decoder receives control data via a sACN (E1.31) or Art-Net-over-Ethernet network connection.
With a capacity of 4,080 RGB pixels (3,060 RGBW pixels) and 4 outputs, the PixLite 4 MkII Controller is perfect for small to middel pixel projects.
In addition to the 4 pixel outputs, the PixLite 4 MkII controller can control another DMX512 universe (controlled only via the E1.31 protocol) via an additional output. Thus, besides the pixels, e.g. a fog machine or a PAR headlight.
The PixLite 4 MkII ECO Controller supports the following protocols:
The PixLite 4 MkII controller is multicast and unicast capable.
The total capacity is 24 DMX universes. It can thus be controlled up to 1,020 RGB pixels or 765 RGBW pixels per output.
The Advatek GUI Utility makes it very easy to configure the controller and update it to new firmware.
Pixel power can be supplied directly through the controller up to 7.5A per output, but it comes standard with 5A mini-blade fuses. You can change the fuses to any values(up to a maximum of 7.5 A, a maximum of 30 A per controller).
||sACN (E1.31), Art-Net
||5V -24V DC
||-40 bis + 80 °C
||1 (only over E1.31)
|max. Pixel per output:
||1,020 RGB-Pixel (765 RGBW-Pixel)
|max. Pixel total:
||4,080 RGB-Pixel (3,060 RGBW-Pixel)
Currently the following pixels are supported:
Note: Only one pixel type can be used per controller.
If your desired pixel is not supported, please contact us, we may be able to realize your pixel for you as a special programming (fee-based).
SHOPVOTE - Bewertungen
There are no product reviews available yet