PixLite Mk3 compared
Which PixLite suits my project?
For up to 4 pixel outputs, the A4-S Mk3 or E4-S Mk3 is enough; for 16 outputs, choose the E16-S Mk3. If the pixels are far away from the controller, choose a long-range transmitter (T8-S Mk3 or T16X-S Mk3) with receivers that can each be placed up to 300 m from the transmitter.
All Mk3 models at a glance
| Model | Pixel outputs | Total pixels (RGB) | Universes | Pixel power | Network | Mounting |
|---|---|---|---|---|---|---|
| A4-S Mk3 | 4 | up to 4,080 | 24 | via the outputs, 7 A per output | 2 × Gigabit | wall or DIN rail |
| E4-S Mk3 | 4 | up to 4,080 | 24 | injected separately | 1 × 10/100 Mbit/s | surface or DIN rail |
| E16-S Mk3 | 16 | up to 16,320 | 96 | injected separately | 1 × 10/100 Mbit/s | surface or DIN rail |
| T8-S Mk3 | 16 via 8 long-range ports | up to 16,320 | 96 | via the receivers | 2 × Gigabit | surface or 19″ rack |
| T16X-S Mk3 | 16 via 16 long-range ports | up to 16,320 | 96 | via the receivers | 2 × Gigabit | surface or 19″ rack |
Up to 1,020 RGB or 768 RGBW pixels per output.
A series or E series?
The A4-S Mk3 powers the pixels directly through its outputs (7 A per output, 28 A in total) and has two Gigabit ports and a housing made of aluminium and ABS. With the E4-S Mk3 and E16-S Mk3, the power supply feeds the pixels separately; the controller itself needs 5–24 V DC. They have one 10/100 port and an ABS housing and are designed for indoor use as standard. Both E models are also available with conformal coating (protective coating on the circuit board).
Long range: transmitters and receivers
The T8-S Mk3 and T16X-S Mk3 transmitters run on 100–240 V AC. They send the data via RJ45 ports to receivers that can each be up to 300 m away. The pixels connect to the receiver, which also powers them.
What all Mk3 controllers can do
- Art-Net and sACN (E1.31) over Ethernet
- RS485 port for DMX in/out
- Gamma correction and dithering
- Shows without a computer from microSD with SHOWTime™, up to 25 triggers (card not included)
Frequently asked questions
How many pixels does a PixLite control?
Up to 1,020 RGB or 768 RGBW pixels per output. That gives the A4-S and E4-S up to 4,080 RGB pixels, and the E16-S, T8-S and T16X-S up to 16,320.
Which pixels can I connect?
You will find an overview of suitable pixel types under Compatible pixels for PixLite Mk3.
Do I need a computer for the show?
No. With SHOWTime™, the controller plays shows from a microSD card.
How do I mount the controller?
Depending on the model, on the wall, on a DIN rail or in a 19″ rack. You will find suitable kits under PixLite mounts.
Not sure how many outputs and receivers your project needs? Tell us about it and we will plan it with you.
Discuss your project- Available immediately
-
Delivery time: 2 - 7 days (DE - int. shipments may differ)