-
MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
-
It is an advanced SPI converter and LED pixel tape driver
-
Additional LED types will be supported with future firmware updates
-
Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
-
Supports a signal frequency of up to 24 MHz
-
The output protocol can be set separately for each of the 2 ports
-
Directly connects to the LEDs via 4-pin screw terminals
-
Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
-
Receives data over Ethernet network (Art-Net and/or Streaming ACN)
-
Can also be used as MADRIX USB interface
-
Works great with the MADRIX Software (sold separately) with quick and easy installation
-
Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
-
Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
-
Automatic HTP merging for two Art-Net sources
-
2 Ethernet ports with daisy chain support for the data connection without using a separate network switch or router
-
Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
-
9 status LEDs, which can be turned off
-
Built-in web page for simple on-device configuration
-
Can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
-
Non-conductive enclosure with IP20 and UL94 V-O flammability rating
-
Fanless, noiseless, and low-energy design
-
Ready within seconds after startup
-
Recommended for any small or large project
-
Multiple devices can be used together without problems
-
The firmware is upgradable for future features
-
Quick start guide / technical manual available in English and German
-
User manuals also available at help.madrix.com
-
Made in Germany
-
More information available at www.madrix.com
-
Power supply of device: Mains Input Socket (M) fehlt provided
| Power supply: |
DC 5 V - 24 V, A) via 2-pin screw terminal (12 A max.), B) via 5 V USB, C) via Port 1 or 2 sourced from LEDs; 6 A max. load per port when supplying through to LEDs |
| Power consumption: |
lower 1.5 W during normal operation (300 mA max.) |
| Data output: |
8x 512 channels SPI TTL (Maximum output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs) |
| Ports: |
2x ports (via 2x 4-pin screw terminals) |
| Ethernet: |
2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with 1 GBit/s) |
| USB: |
USB 2.0, type B port |
| Case: |
Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN rails or wall mounting |
| Dimensions: |
92 mm x 70 mm x 45 mm (length x width x height) |
| Temperature range: |
- 10 °C to 70 °C (Operating) | - 20 °C to 85 °C (Storage) |
| Relative humidity: |
5 % to 80 %, non-condensing (Operating / Storage) |
| Delivery included: |
1 Controller |
Currently the following pixels are supported:
APA101 / APA102 / APA104 / APA106 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS512B3, UCS8904, UCS9812S, WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of July 2018)
