Question about item
Description
WS2811 pixel string 12 V DC, square 12 mm pixels, 10 cm pixel pitch, IP68
The string carries 50 individually addressable RGB pixels with WS2811 chip at a pitch of 10 cm. The pixels are potted (IP68), each wire has an approx. 0.32 mm² cross-section. The string runs on 12 V DC and needs a pixel controller and a suitable power supply. The pixels limit their current with series resistors (resistor), the proven standard version. The square housings have a mounting tab for screwing onto panels and signs.
Pixel strings with this construction are often sold as “18 AWG”. Genuine 18 AWG is about 0.82 mm². Strings like these do not reach that cross-section, and it could not be soldered reliably to the pixel boards. That is why we state the actual value. More on mm² and AWG
Is it right for my project?
What the string is made for
- Pixel mapping and light installations in which every pixel is controlled individually
- Flat mounting on panels, signs and matrices – screwed via the mounting tab
- Outdoor installations – the pixels are potted to IP68
Not suitable for
- Operation without a pixel controller – on supply voltage alone the pixels do not light up
- Voltages other than 12 V DC, and certainly not mains voltage
- Shortened ends outdoors without sealing
Variants
- 50 pixels · xConnect® connector · black cable · approx. 5 m
Choose the variant at the top of this page.
Connection
How to connect the string
- Mind the direction. Data runs in one direction only. Connect the controller to the input of the string – connected the wrong way round, the pixels stay dark.
- Choose the power supply. Allow up to 36 W (3 A at 12 V) per 50 pixels, that is 60 mA per pixel at full white, plus about 20 % reserve.
- Inject power. With several strings in a row the voltage drops. Inject power additionally, with xConnect® for example using the T-connector 10209.
- Switch on. Make all connections first, then switch on the power supply.
xConnect® pin assignment
The drawing shows the contact assignment of plug and socket of the xConnect® variants. The wire colours in the legend apply to the xConnect® cables; for strings with blue/white/red cable only the assignment at the connector counts.
Scope of delivery
- 1 pixel string in the selected variant, with plug and socket at the ends
- Power supply and controller are not included.
Frequently asked questions
Can I shorten the string?
How much current does the string need?
What does “resistor” mean?
Are other pixel pitches or lengths available?
Technical data
| Item information | Value |
|---|---|
| Ambient operating temperature: | -15 to +60 °C |
| Wire cross-section: | approx. 0.32 mm² per core (34 × 0.11 mm) |
| Connector system: | xConnect® |
| Color depth: | 24 bit (≈16 million colours) |
| Cuttable: | Yes, after each pixel |
| Form factor: | Pixel string |
| Controller IC: | WS2811 |
| Pixel Diameter: | 12 mm |
| WEEE-Reg.-Nr.: | DE 32487762 |
| Cable color: | black |
| Voltage management: | resistor |
| Pixel spacing: | 4 inch (≈ 10 cm) |
| Power (string): | ~ 36 W (50 px) |
| Design current (string): | approx. 3.0 A (50 px @ full white) |
| Length (string): | approx. 5 m |
| Operating Voltage: | 12 Volt DC |
| Protection class: | IP68 |
| Shipping weight: | 0,01 kg |
Maybachstraße 8
Baden-Württemberg
76227 Karlsruhe
Deutschland
info@pixltec.de